Journal · Conference Planning

How to Plan AV for Conference Breakout Rooms

SPRK Productions · Published October 28, 2026 · 6 min read

Editorial illustration of three small hotel meeting rooms seen from above like a cutaway model, each set for a breakout session with rows of chairs facing a screen glowing amber, cyan or magenta, a projector cart in one room, a lectern with a microphone in another, a pair of speakers on stands in the third, a laptop on the presenter table in each, and a rolling cart of spare cables in the hallway outside

Written by SPRK Productions, a Phoenix event production company working across planning, audio, video, lighting, event capture and post-event content. About SPRK.

Breakout rooms are where a lot of a conference actually happens. The general session gets the big screens and the rehearsal, but the smaller sessions are where people learn the thing they came for. And they're usually the last part of the AV plan, often just one line that says "projector and screen in each room."

The tricky part isn't any single room. It's that several rooms run at the same time, the presenter changes every hour, and nobody from the AV team is standing in the room when something goes sideways. Here's how we'd plan breakout AV so every session starts on time and sounds and looks right.

Plan one standard room, then plan the changeover. If every room has the same kit and every session swap has a short routine, the whole breakout block gets a lot calmer.

Start with a simple room list

Before anyone talks about gear, make a list with one line per room: the room name, how many people it seats, which sessions run there and when, and anything special a presenter needs. That last column is where you catch the things that change the plan, like a session that plays a video with sound, a panel that needs three mics, a remote speaker joining by video, or a session someone wants recorded.

Most rooms will end up looking the same, and that's the point. The list shows you which few rooms are different, so you can plan those on purpose instead of finding out at 8 a.m.

Give every room the same basic kit

A standard room kit makes setup faster, makes troubleshooting easier and means a presenter who moves rooms finds the same thing everywhere. For a typical breakout, that usually means:

Decide whose laptop runs the slides

This is the biggest choice in breakout AV, and it's worth making on purpose. You've got two options.

A room laptop with the files already loaded. Presenters send their slides ahead of time, the AV team loads them on a laptop in each room and checks every deck. Changeovers are fast because nobody is plugging in. The catch is that you need a firm deadline for files and someone tracking which version is final.

Presenters bring their own laptops. It's easier for the speakers, who get their own notes and fonts. But every changeover now includes plugging in, finding the right display setting and hoping the adapter fits. Plan a little more time between sessions if you go this way.

Plenty of events do both: room laptops by default, with a plug-in option for the speaker who really needs their own machine. Whatever you pick, tell presenters early. Our slides and video handoff guide covers file formats and deadlines that keep version mix-ups to a minimum.

Plan the changeover between sessions

The few minutes between sessions are when breakout AV goes right or wrong. Agree on a short routine for every room and every swap:

Build enough time into the agenda for that routine plus people walking in and out. If the breaks between sessions are very short, the AV team ends up racing the clock, and sessions start late.

Keep a technician within reach

You don't always need a technician sitting in every room all day. A common setup is one or more rovers who each cover a handful of rooms, do the changeovers and fix the small stuff. Rooms with a panel, a remote presenter or a recording usually deserve their own person, at least for that session.

The part people forget is how a presenter actually reaches the rover. Put a simple note at each presenter table with a number to text, or give room hosts a radio. If help is a five-minute search down the hallway, a two-minute problem turns into a ten-minute delay.

Don't forget hearing access

If a breakout room uses a mic and speakers, plan for assistive listening. Under the 2010 ADA Standards, assembly areas include public meeting rooms, and where audible communication is part of how the room is used and audio amplification is provided, an assistive listening system is required, with a minimum number of receivers based on seating. When several of those rooms are in one building under one management, the receiver count can be figured on the total seats across them.

In practice, ask the hotel or venue what assistive listening they have for the meeting rooms you're using, how many receivers, and who hands them out. Then put a line about it in the program so attendees know to ask.

Decide what gets recorded

Recording every breakout sounds great until you add up the cameras and the people to run them. Pick the sessions that are worth sharing later, and plan those rooms a little differently: a mic on every speaker, the slides captured cleanly and enough light on the presenter. Our event recording guide walks through deciding what you actually want to end up with.

A short FAQ

Do small breakout rooms need a microphone?

Not always. If everyone can hear the presenter comfortably at a normal speaking voice, you can skip it. Once the back rows have to strain, or you'll have questions from the audience, a mic helps. Remember that adding amplification also means planning for assistive listening.

How much time should we leave between breakout sessions?

Enough for people to change rooms and for the AV changeover: closing one deck, opening the next and a quick mic and clicker check. If presenters bring their own laptops, give it a bit more.

Should presenters use their own laptops?

It's easier for them, but it slows down every changeover. Room laptops with the files loaded ahead of time are faster and more reliable, with a plug-in option for the speaker who really needs their own machine.

Do we need a technician in every breakout room?

Not usually. A rover covering a group of rooms can handle changeovers and small fixes. Give a room its own technician when it has a panel, a remote presenter or a recording.

Let's plan your breakouts together

SPRK plans and runs audio, video and lighting for Phoenix-area conferences, from the general session to the smallest breakout. Send us your room list and agenda and we'll help you build a room kit and a changeover plan that fits. We'd love to help.

Back to the Journal for more practical event planning guides.

Free worksheet: the Venue Technical Fit Checker

Take this on your walkthrough, before the venue contract is signed. It covers sightlines, power, rigging, internet, load-in and the venue’s rules for outside vendors, then turns the unknowns into a short list of questions to send the venue.

Get the free worksheet

Free Planning Tool

Plan your event in a few minutes.

Tell our free planner about your room and your headcount, and it builds the stage for you: the screen size and who can read it, the sound, the lighting looks, the crew, a run of show and a checklist. Save it as a PDF, or send it to us when you’re ready.

Plan Your Event

Keep planning

A few more guides we put together for Phoenix event planners: