Journal · Production Planning
How to Plan Power for Your Event AV

Power is the part of an event AV plan that nobody thinks about until something goes quiet. Speakers, screens, the sound desk, an LED wall and the lights all need somewhere to plug in, and in a lot of rooms the outlets are wherever the architect put them years ago, not where the stage ends up.
You don't need to know how electricity works to plan this well. You just need to ask a few questions early and get the answers to your AV team before load-in day. Here's how we'd think it through.
Find out where the power is, who controls it and what else is plugged into it. Those three answers cover most of the surprises we see on show day.
Ask the venue where the power actually is
Start on the walkthrough or with the room drawings. You want to know where the outlets and any larger power connections are, how close they are to the stage, the screens and the spot where the sound desk will sit, and whether any of them are on the far side of an airwall or a door that stays closed during the event.
Also ask whether the room has dedicated power for production. Many hotel ballrooms and convention spaces have larger connections set aside for stage gear, and many of them charge for using them. Knowing that up front means it's in the budget instead of on a surprise invoice.
Find out who controls it
In a lot of hotels and convention centers, the venue or its in-house provider is the only one allowed to connect to house power. That's common, and it's much easier to plan around when everyone knows it ahead of time.
Ask who connects your AV team to power, when they're available during load-in, and who to call if something trips during the program. Our hotel in-house AV guide has a longer list of the services venues often keep for themselves.
Keep AV off the catering circuits
Coffee urns, warming boxes and portable bars draw a lot of power, and they tend to show up right when the program starts. If the sound system shares a circuit with a row of coffee urns, the breaker can trip in the middle of a welcome speech.
Ask the venue which outlets catering will use, and ask your AV team to plan the stage, screens and sound desk on separate circuits from anything that heats or cools. It's a short conversation with the banquet captain that saves a very awkward pause.
Tell your AV team everything that needs power
Your AV team will plan their own gear, but they won't know about the things other vendors are bringing unless someone tells them. Make a quick list for your AV lead that includes:
- Other vendors' gear. A photo booth, a DJ, a band, a sponsor display with its own screen, a step-and-repeat with lights.
- Registration and check-in. Laptops, badge printers and phone chargers at the front table.
- Anything outside the main room. A foyer screen, a reception speaker, an overflow room.
- Bigger visual pieces. An LED wall or a lot of lighting needs more planning than a projector and a pair of speakers. Our LED wall placement guide covers the questions to ask about power near the wall.
With one list, the AV team can see the whole picture and tell you early if a room doesn't have enough power for everything you're planning.
Plan where the cables will run
Every piece of gear that needs power also needs a cable from the outlet to the gear, and those cables have to go somewhere. Ask your AV team to show you the cable paths on the room layout, especially anywhere they cross an aisle, a doorway or a path guests will walk.
Where a cable has to cross a walkway, it should be taped down flat or run under a cable cover. Pick low covers with sloped edges so guests using wheelchairs, walkers or strollers can roll over them. The 2010 ADA Standards are a good guide here: a change in level up to a quarter inch can be vertical, one between a quarter and half an inch should be beveled with a slope no steeper than 1:2, and anything higher than half an inch needs to be ramped. Better still, route cables around the edges of the room so the main aisles stay clear.
Outdoors, plan the power first
Patios, lawns and parking lots often have very little power, and sometimes none. Ask the venue exactly what's available and where before you plan the stage, because it might decide where the stage goes. If you need a generator, ask where it will sit and how the power gets to the stage. Generators make noise, so they belong far from the speeches and the guests, with the cable path planned like any other walkway crossing.
Phoenix heat matters too. Gear that sits in the sun gets hot fast, and so do cables and power boxes. Our outdoor event sound guide covers more of what changes when you move an event outside.
Have a plan for when something trips
Even with good planning, a breaker can trip. What matters is how fast it gets fixed. Before the event, make sure your AV lead knows where the breaker panel for the room is, or who at the venue can reach it, and has a phone number that someone will actually answer during the program.
Ask your AV team which gear is most important to keep running if power drops, usually the main mics and the sound desk. They can tell you what they'd do to keep the program going while the venue resets the circuit.
A short FAQ
Do we need to tell the venue how much power our AV needs?
Usually your AV team handles that conversation, but they'll need to know everything else plugging in that day. Give them your vendor list early, and ask the venue to share what power is available in the room.
Can we just use extension cords from the wall outlets?
For a small setup, sometimes. For a stage, screens and a sound system, your AV team will usually want to plan the power on purpose so the gear is spread across the right circuits and cables are run safely. Many venues also have rules about what outside teams can plug in, so ask first.
Why does the venue charge for power?
Many hotels and convention centers charge for dedicated production power and for their staff to connect it. Ask for the cost while you're comparing venues so it's in your budget from the start.
Do we need a generator for an outdoor event?
It depends on the location. Some outdoor spaces have plenty of power nearby and some have none. Ask the venue what's available and where, then let your AV team tell you whether it's enough for your plan.
Let's plan your power together
SPRK plans and runs audio, video and lighting for Phoenix-area events, and power is part of every plan we build. Send us your venue and your vendor list and we'll help you figure out what the room needs before load-in day. We'd love to help.
Back to the Journal for more practical event planning guides.
Free worksheet: the Venue Technical Fit Checker
Take this on your walkthrough, before the venue contract is signed. It covers sightlines, power, rigging, internet, load-in and the venue’s rules for outside vendors, then turns the unknowns into a short list of questions to send the venue.
Free Planning Tool
Plan your event in a few minutes.
Tell our free planner about your room and your headcount, and it builds the stage for you: the screen size and who can read it, the sound, the lighting looks, the crew, a run of show and a checklist. Save it as a PDF, or send it to us when you’re ready.