Journal · Rehearsal Planning

How to Plan a Tech Rehearsal for Your Event

SPRK Productions · Published November 9, 2026 · 7 min read

Editorial illustration of an empty conference ballroom before doors open, seen from the back: rows of empty chairs, a low stage with a lectern, a microphone on a stand in a warm spotlight, tape marks on the stage floor and a large screen of soft abstract color. In the foreground a control table holds a closed laptop, a blank clipboard, a coiled cable and a desk lamp.

Written by SPRK Productions, a Phoenix event production company working across planning, audio, video, lighting, event capture and post-event content. About SPRK.

Most of the problems we'd ever want to catch at an event show up in the tech rehearsal. The slide that won't advance, the mic that cuts out at one corner of the stage, the video that plays without sound, the speaker who has no idea which side to walk on from. Find those things at 2 p.m. and they're small. Find them at 7 p.m. with the room full and they're the part everybody remembers.

The tricky part is that a rehearsal is usually the first thing to get squeezed. Load-in runs long, a speaker's flight is late, and the time you set aside quietly disappears. Here's how we'd plan one so it actually happens and actually helps.

Rehearse the transitions, not the whole show. Most of what goes wrong lives in the handoffs between people, so that's where your rehearsal time should go.

Decide what kind of rehearsal you need

"Rehearsal" can mean very different things, and it helps to agree on which one you're talking about before you book anybody's time:

For most corporate meetings and conferences, a tech check plus a cue-to-cue plus short speaker walk-throughs covers it. Write down which ones you're doing and when.

Protect the time in the schedule

A rehearsal only happens if it's in the schedule with a real start time, and if the setup has a realistic chance of being done by then. That means working backward from doors. Our load-in timeline guide walks through how to do that, and rehearsal should be its own line in it, not whatever's left over.

Talk to the venue early, too. If the room is being used the night before, or the catering team needs it for setting tables, you might share it during your rehearsal window. That's usually fine, but everybody should know about it ahead of time, including the fact that you'll be playing sound and changing lights while they work.

Get the right people in the room

A rehearsal without the people who make the calls isn't much of a rehearsal. At minimum, you want:

If an executive can only spare ten minutes, that's okay. Ask for those ten minutes at a specific time, and use them for the mic, the slides and the walk on and off. Have someone stand in for them during the rest of it.

Run the content on the actual system

The single most useful thing a rehearsal does is play every file through the gear you'll use for the show. A deck that looks fine on a laptop can have missing fonts, videos that don't play or a weird aspect ratio once it's on the big screen. A video can be quiet on headphones and nearly silent in a ballroom.

So get final files to your AV team before rehearsal, not during it. Our slides and video handoff guide covers what to send and when. Then click through every slide and play every video on the show system, with the sound up. If someone's presenting from their own laptop, test that exact laptop, with its exact adapter, at the lectern.

Check every mic where it'll be used

Have each person who'll speak say a few lines into their actual mic, at the volume they'll really use, from wherever they'll be standing. A lavalier that sounds great in the middle of the stage can cut out when someone wanders toward the edge, and a handheld that's fine at the lectern can feed back near the speakers.

Do the same for audience questions. Walk the Q&A mic to a few spots in the room and talk into it. Our wireless microphone guide and panel mic guide go into how many you need and where they go.

Walk the stage

Presenters need to know three things before they're in front of an audience: where they come on from, where they stand and where they go when they're done. Put a small piece of tape on the stage where you want them, and walk each person through it once.

While they're up there, have them look at the confidence monitor and check that they can read it. And look at them from the audience side, too. If someone's standing in a dark spot or a shadow, it's much easier to move the light or the mark now. Our speaker lighting guide has more on that.

Run the transitions cue by cue

This is the heart of it. Go through the run of show and stop at every point where control passes from one person to another. For each one, ask: what's the cue, who calls it, and what does everyone else do? Then actually run it.

The opening of the show is worth running twice. It sets the tone for everything after it, and it usually has the most going on at once: walk-in music fading, lights changing, a video, an offstage announcer, and the host walking on. If that first minute goes smoothly, the room relaxes, and so does your team.

Write down what changed

Rehearsals almost always change something. A speaker swaps two slides, a video moves earlier, someone decides to walk on from the other side. Those changes are exactly what tends to get lost by showtime.

Pick one person to keep the run of show and update it as things change. Before you break, read the changes back to the crew and the host, and make sure everyone has the same final version. If a presenter sends a new deck after rehearsal, decide ahead of time who's allowed to approve it and how late is too late.

Have a plan for when you can't rehearse

Sometimes there's no time, or the room isn't yours until an hour before doors. That doesn't mean skipping it. It means shrinking it. Do the tech check no matter what, then spend whatever's left on the opening, the hardest transition and every mic. Ten focused minutes on the handoffs are worth more than a rushed run of the whole show.

You can also do some of the work before you ever get in the room. A short video call with the host and your AV lead to talk through the run of show, line by line, catches a lot of the same questions.

A short FAQ

How long should a tech rehearsal be?

It depends on how many transitions you have, not how long the show is. A simple meeting with one or two speakers might need a short tech check and a quick walk-through. A general session with videos, walk-ons and awards needs a lot more. Count your transitions, and ask your AV lead what they'd want for each one.

Do speakers really need to rehearse?

Not their whole talk. But a few minutes on the stage to check their mic, see their slides and find their mark makes a big difference in how comfortable they look. It's usually the part they're glad they did.

When should we do the rehearsal?

Late enough that the setup is finished, and early enough that there's still time to fix things before doors. If you can, leave a buffer between the end of rehearsal and the start of the show for changes, a reset and a break for the crew.

What if the venue won't give us the room in advance?

Ask what's possible, even if it's a short window. If it isn't, plan a tight on-site tech check, cover the run of show on a call ahead of time, and focus whatever room time you get on the opening and the mics.

Let's plan your rehearsal together

SPRK helps with event planning and production for Phoenix-area events, including the run of show, the schedule and the rehearsal that holds it together. Send us your program and your venue, and we'll help you figure out what your show needs to rehearse.

Back to the Journal for more practical event planning guides.

Free worksheet: the Show Moment Blueprint

Write down the moments that have to land (the opening, the big reveal, every handoff), then note who is on stage, what cue runs, who owns it and what happens if it doesn’t. Bring it to the planning call and everyone works from the same page.

Get the free worksheet

Free Planning Tool

Plan your event in a few minutes.

Tell our free planner about your room and your headcount, and it builds the stage for you: the screen size and who can read it, the sound, the lighting looks, the crew, a run of show and a checklist. Save it as a PDF, or send it to us when you’re ready.

Plan Your Event

Keep planning

A few more guides we put together for Phoenix event planners: