Journal · Audio Planning
How to Plan Wireless Microphones for Your Event

Wireless mics are one of those things nobody thinks about until one cuts out in the middle of a keynote. Then it's the only thing anyone in the room remembers.
Most wireless trouble isn't bad luck. It comes from a handful of planning details: how many mics are on at once, which frequencies they use, how fresh the batteries are and whether anyone walked the room with them before doors. Here's how we'd plan wireless microphones for a conference, gala or company event so they just work.
Count the mics that are on at the same time, not the people who speak. That number decides how many wireless channels the event really needs.
Count channels, not microphones
Every wireless mic needs its own receiver and its own frequency. Shure's guide to coordinating wireless systems puts it simply: a receiver can only listen to one transmitter at a time, and two mics on the same frequency will step on each other.
So the useful question is how many mics need to be live at once. Walk through the agenda and look for the busiest moment. A panel of four with a moderator is five channels. An awards segment where the host hands off to a presenter who calls up a winner might be three. Add a channel or two for the audience question mic and a spare, and that's your number.
If a mic gets handed from person to person, it can stay one channel. If two people need to talk back and forth, they each need their own.
Match the mic to the person
- Handheld: the easiest to use and the hardest to get wrong. Great for hosts, toasts, awards and audience questions.
- Lavalier (clip-on): good for a speaker who wants their hands free and stays fairly still. Quieter than a handheld, so it needs a little more care in a loud room.
- Headset: the most reliable hands-free option for someone who moves around the stage or turns their head a lot.
Get the speaker list to your AV team early with a note on who's presenting, who's on a panel and who might wander into the audience. We go deeper on panels in our panel microphone guide.
Let your AV team plan the frequencies
This part is invisible to guests, and it's where a lot of dropouts start. Wireless mics share the airwaves with TV stations and every other wireless system nearby, and the rules for where they can operate have changed over the years.
Under the FCC's current rules for unlicensed wireless mics (47 CFR 15.236), they can run on TV channels that aren't being used in that area, plus two small slices around 614 to 616 MHz and 657 to 663 MHz. Phoenix has plenty of TV stations, so the open channels in Phoenix won't be the same as the open channels somewhere else. Some older mics can also tune to frequencies they're no longer allowed to use.
Hotels and convention centers add their own wrinkle. The ballroom next door might have its own wireless mics, the venue's in-house team might have systems running, and LED walls and video gear can add radio noise of their own. A good AV team scans the room on site with the other gear powered up, then picks frequencies that work together. Shure calls the open gaps between TV channels and other mics "white spaces," and that's where your channels should land.
What you can do as the planner: tell your AV team about anything else wireless in the building, like the hotel's own mics, a band bringing in-ear monitors, or another event next door. Ask them how they'll coordinate frequencies with everything else. If the answer sounds like "we'll just turn them on and see," that's worth a follow-up.
Treat batteries like part of the show
A transmitter that worked at soundcheck can still fade halfway through the afternoon. We'd plan on fresh batteries (or fully charged packs) at the start of every show day, with spares and a charger at the tech table.
For multi-session days, decide who changes batteries and when, usually during a break. Somebody on the AV team should be watching battery levels on the receivers through the day, not just at the start.
Keep a backup at the lectern
Even a well-planned wireless system benefits from a plan B. A wired mic on the lectern, or a spare handheld sitting on the stage, means a dropout becomes a five-second swap instead of an awkward pause. It's an easy add, and it's usually the first thing we reach for if anything sounds off.
Rehearse with the radios on
A quick "check, one, two" at the tech table doesn't tell you much. Rehearse with every mic on at the same time, in the room, with the LED wall, projectors and lights running. Have someone walk the mic to every spot a speaker might go: the front of the stage, the steps, the aisle, the back corner where a CEO likes to wander during Q&A.
That walk finds the dead spots and the places where someone walks too close to the loudspeakers and the mic starts to squeal. It's much easier to fix with ten minutes of rehearsal than with a full ballroom watching. If rehearsal time is tight, our run of show guide has a few ideas for where to fit it.
A short FAQ
How many wireless mics does my event need?
Count the most mics that need to be live at the same moment, then add one or two for audience questions and a spare. A single presenter might need two. A panel can easily need six.
Why do wireless mics cut out?
The usual causes are interference from other wireless systems or TV channels, weak batteries, or a speaker walking somewhere the receiver can't hear well. Frequency planning, fresh batteries and a walk-through rehearsal take care of most of it.
Can we use the hotel's wireless mics alongside an outside AV company?
Often, yes, but both teams need to know about each other's systems so the frequencies are planned together. Our hotel in-house AV coordination guide covers how to split that up.
Do we really need a wired backup mic?
We'd recommend it for anything with a keynote, awards or a program you can't redo. It costs very little and saves the moment if something goes wrong.
Let's plan your mics together
SPRK plans and runs audio for Phoenix-area events, from a single lectern to a full general session with panels and audience questions. Send us your agenda and speaker list and we'll help you figure out the right number of mics and how to keep them solid all day. We'd love to help.
Back to the Journal for more practical event planning guides.
Free worksheet: the Show Moment Blueprint
Write down the moments that have to land (the opening, the big reveal, every handoff), then note who is on stage, what cue runs, who owns it and what happens if it doesn’t. Bring it to the planning call and everyone works from the same page.
Free Planning Tool
Plan your event in a few minutes.
Tell our free planner about your room and your headcount, and it builds the stage for you: the screen size and who can read it, the sound, the lighting looks, the crew, a run of show and a checklist. Save it as a PDF, or send it to us when you’re ready.