Journal · Video Planning

How to Bring a Remote Speaker Into Your Event

SPRK Productions · Published November 2, 2026 · 6 min read

Editorial illustration of an empty hotel conference room set theater style, with rows of chairs facing a low stage, a lectern with a gooseneck microphone, and a large screen showing a faceless, stylized figure inside a video call frame, while a glowing line runs from a network outlet on the wall past a production table with two laptops, headphones and a camera on a tripod pointed at the seats

Written by SPRK Productions, a Phoenix event production company working across planning, audio, video, lighting, event capture and post-event content. About SPRK.

Sometimes the speaker everyone wants can't be in Phoenix that day. They're on another coast, they're traveling, or they can only give you twenty minutes from their office. Bringing them in on a video call can work really well, and the audience in the room barely notices the distance when it's planned right.

When it isn't planned, it's one of the most awkward moments an event can have: a frozen face on the big screen, an echo nobody can find, or a speaker who can't hear the question they were just asked. Here's how we'd think it through.

Test the call with the actual speaker, from the actual room, before show day. Almost every remote speaker problem shows up in that test, while there's still time to fix it.

Live, recorded, or a bit of both?

Start by deciding what the session really needs. If the value is the conversation, like a Q&A, a panel or a keynote that reacts to the room, it should be live. If it's mostly a prepared talk, a pre-recorded version is much safer, and the speaker can still join live afterward for questions.

Even for a live session, ask the speaker to record a short version of their talk ahead of time. If the connection fails on the day, you have something to play instead of an empty screen.

Get a wired connection at the AV table

The room's side of the call needs a solid internet connection, and venue Wi-Fi shared with a few hundred guests' phones isn't it. Ask the venue for a wired connection at the spot where your AV team will set up, and ask whether it's dedicated to you or shared with the whole building. Many hotels charge for it, so ask early. Our hotel in-house AV guide covers the other services venues often keep for themselves.

For a sense of scale, Zoom's bandwidth guide lists 3.8 Mbps up and 3.0 Mbps down for a 1:1 call in 1080p. That's what the call itself uses, so you want a comfortable cushion on top, on both ends.

Help the speaker set up on their end

The speaker's setup matters just as much as yours, and most people have never presented to a ballroom from their desk. A short note a week or two ahead helps a lot. Ask them to:

Sound has to work both ways

The room needs to hear the speaker clearly through the sound system, and the speaker needs to hear the room. That second part is where echo comes from. If the speaker's own voice comes back to them through your room microphones, they'll hear themselves a moment late and the call can start to howl.

Your AV team can send the speaker a mix of the room microphones without their own voice in it. Ask them how they plan to handle it, and ask the speaker to wear headphones so nothing from their computer speakers gets picked up again by their own mic.

Let them see the room

Talking to a laptop with no audience is hard. If you can, put a camera on the audience so the speaker sees people laughing, nodding and raising hands. It makes a real difference to how the talk lands. It also helps if the speaker has a view of their slides and a clock, the same way a confidence monitor helps a speaker on stage.

Decide who runs the slides

The speaker can share their screen, but then their slides depend on their connection and their laptop, and the room sees every notification that pops up. Usually it's smoother to get the slides ahead of time and have the AV team run them in the room while the speaker says "next slide" or uses a cue. Either way, settle it before the test. Our slides and video handoff guide covers file formats, fonts and deadlines.

Plan the Q&A so they can hear it

If someone in the audience asks a question without a microphone, the remote speaker won't hear it. Plan a handheld microphone that goes to whoever is asking, or have the host repeat each question into their mic. Our panel discussion microphone guide has more on audience mics.

Put the handoff in the run of show

The tricky moment is the switch from the room to the call. Have the speaker join early and wait backstage on the call, muted and off the main screen, so the connection is already up and checked before they're introduced. Then the host introduces them, the AV team puts them on screen and unmutes them, and nobody waits on a loading screen.

Write that sequence into your run of show with times: when they join, when the room checks with them, when they go live and what happens when they finish.

Have a plan if the call drops

Agree on the backup before the day, so nobody has to invent one in front of the audience. A few things that help:

A short FAQ

Does the remote speaker need the venue’s internet?

The speaker joins from their own internet, wherever they are. It's the room's side that needs the venue connection, and that should be wired, not the guest Wi-Fi.

How early should the speaker join?

For the test, plan a full run-through a day or two before with the speaker and your AV team, ideally from the venue. On the day, have them join well before their slot so the AV team can check sound and video while the room is busy with something else.

Should we pre-record the talk instead?

If the talk is mostly prepared and doesn't need the room's reactions, pre-recording is the safer choice. Many planners do both: play the recording, then bring the speaker in live for questions.

Can online viewers see the remote speaker too?

Yes, if you're also streaming the event, but plan it together so the remote speaker, the room and the stream all hear each other. Our livestream planning guide covers the streaming side.

Let's plan your remote speaker together

SPRK plans and runs audio, video and lighting for Phoenix-area events, including video calls into the room. Tell us who's joining and from where, and we'll help you plan the connection, the sound and the backup before show day. We'd love to help.

Back to the Journal for more practical event planning guides.

Free worksheet: the Show Moment Blueprint

Write down the moments that have to land (the opening, the big reveal, every handoff), then note who is on stage, what cue runs, who owns it and what happens if it doesn’t. Bring it to the planning call and everyone works from the same page.

Get the free worksheet

Free Planning Tool

Plan your event in a few minutes.

Tell our free planner about your room and your headcount, and it builds the stage for you: the screen size and who can read it, the sound, the lighting looks, the crew, a run of show and a checklist. Save it as a PDF, or send it to us when you’re ready.

Plan Your Event

Keep planning

A few more guides we put together for Phoenix event planners: