Journal · Video Planning

Do You Need Camera Shots on the Big Screens? How to Plan IMAG

SPRK Productions · Published November 11, 2026 · 7 min read

Editorial illustration of a large empty ballroom set for a general session, seen from the back: rows of empty chairs, a wide stage with a lectern in a warm spotlight, and two large screens beside the stage showing an enlarged close-up of the same lectern and microphone. In the foreground a video camera with a small glowing monitor stands on a tripod on a railed riser, a coiled cable at its feet.

Written by SPRK Productions, a Phoenix event production company working across planning, audio, video, lighting, event capture and post-event content. About SPRK.

In a big room, the person on stage gets small fast. From the back half of a ballroom, a keynote speaker can look like a dot behind a lectern, and the folks in the last rows end up watching the slides because they can't really see the face. Putting a live camera shot of the speaker on the big screens fixes that. In our world it's called IMAG, short for image magnification.

It's one of those things that can make a general session feel like a real show, and it's also one of those things a lot of events don't actually need. Here's how we'd think it through.

IMAG is for the back of the room. If everyone can already see the speaker's face, you probably don't need it. If they can't, it's often the thing that makes the room feel connected.

Decide if your room needs it

The easiest way to tell is to stand where the last row will be and look at the stage. If you can see a person's expression clearly from there, a camera on the screens is a nice extra, not a must. If you're squinting, or the stage is far away and low, your back rows are going to feel left out without it.

Things that push us toward IMAG:

Things that push us away: a small meeting where the stage is close, a training session that's mostly slides, or a room where the screens are already busy with content the audience really needs to read.

Plan your screens around it

IMAG needs a screen to live on, and that changes your screen plan. The most common setup is a center screen for slides with a screen on each side for the camera, but there are other ways to do it. Some events show slides and the speaker side by side on one wide screen or LED wall. Others switch back and forth on the same screens, camera while someone is talking and slides when there's something to read.

Switching back and forth costs the least, but it means someone is always choosing between the speaker and the content. If both matter at the same time, plan for enough screen space to show both. Our LED wall vs. projection guide and our guide to LED wall content size can help you figure out what the screens should be.

Pick a camera plan that fits the show

You don't always need a whole camera crew. It usually comes down to how much happens on stage:

Each camera at the back of the room needs a clear line to the stage, so plan where it sits before the seating chart is final. A camera riser takes up real space, and nobody wants to find out on show day that it blocks two rows or a fire exit.

Light the stage for the camera

A camera is harder to please than people are. A face that looks fine to the audience in the room can look dark or flat on a big screen, especially next to bright slides. Faces need light from the front, and it needs to be even across the whole area where people will stand and walk.

This is a big reason to tell your AV team early that you want IMAG. It changes the lighting plan. Our speaker lighting guide goes into what good front light looks like.

Watch out for the delay

Video takes a moment to travel from the camera to the screen. When everything is set up well you barely notice it, but if the picture lags much behind the sound, it starts to look like a badly dubbed movie, and people notice that fast. It's something to ask your AV team about, and something to watch for in rehearsal, especially if the signal is passing through a lot of gear or a streaming setup on its way to the screen.

Share the plan with your speakers and host

Speakers don't need to do anything special for IMAG, but a few small things help. Let them know where the camera is, so they're not surprised to see themselves ten feet tall. Ask them to stay inside the lit area. And if you have any presenters who'd rather not be on camera, or a moment where you'd rather show slides only, write that into the run of show so whoever is running the screens knows ahead of time.

Then check it in rehearsal. Look at the screens from the back row while someone is speaking, check the framing and the light, and watch for that delay. Our tech rehearsal guide covers how to fit that in.

Get more out of the cameras you already have

If you're putting cameras in the room for IMAG, you're halfway to a recording or a livestream. Talk with your AV team about whether the same cameras and switcher can feed a recording of the program or a stream for remote viewers. Planning that early is usually much easier than adding it later. Our event recording guide and livestream guide walk through what to decide.

One thing to keep in mind if you record: what looks good live on a big screen and what looks good in an edited video aren't always the same shot, so let your team know which one matters more to you.

A short FAQ

What does IMAG stand for?

Image magnification. It just means a live camera shot of the people on stage, shown on the big screens so everyone in the room can see them up close.

Do we need IMAG for a small event?

Usually not. If the audience is close enough to see the speaker's face clearly, the screens are better used for slides and video. IMAG pays off in bigger rooms and longer distances.

Can one screen show both the speaker and the slides?

Yes. A wide screen or LED wall can show both side by side, or the operator can switch between them. It depends on whether the audience needs to see the speaker and the content at the same moment.

Can we use the IMAG cameras to record the event?

Often, yes. It's worth planning together from the start, so the camera positions, the switcher and the recording all work for both jobs.

Let's plan your screens together

SPRK helps with audio and visual production for Phoenix-area events, including cameras, screens and the lighting that makes them look good. Send us your room, your headcount and your program, and we'll help you figure out whether IMAG belongs in your show.

Back to the Journal for more practical event planning guides.

Free worksheet: the Venue Technical Fit Checker

Take this on your walkthrough, before the venue contract is signed. It covers sightlines, power, rigging, internet, load-in and the venue’s rules for outside vendors, then turns the unknowns into a short list of questions to send the venue.

Get the free worksheet

Free Planning Tool

Plan your event in a few minutes.

Tell our free planner about your room and your headcount, and it builds the stage for you: the screen size and who can read it, the sound, the lighting looks, the crew, a run of show and a checklist. Save it as a PDF, or send it to us when you’re ready.

Plan Your Event

Keep planning

A few more guides we put together for Phoenix event planners: