Journal · Gala Planning

How to Plan the AV for a Fundraising Gala

SPRK Productions · Published November 6, 2026 · 8 min read

Editorial illustration of an empty gala ballroom before doors open, with round tables set with candles and flowers, a low stage, a lectern holding an auction gavel and a large screen showing rising bars. In the foreground a row of blank bid paddles and a handheld microphone sit on a draped table.

Written by SPRK Productions, a Phoenix event production company working across planning, audio, video, lighting, event capture and post-event content. About SPRK.

A fundraising gala is three events at once. It's a dinner, it's a show, and somewhere in the middle of it you're asking a room full of people to give money. For a Phoenix-area nonprofit, that ask can be a big part of the year's budget, so it's the part of the night the AV has to protect.

Most of the gala AV we'd plan comes down to one question: when the ask happens, can everybody in the room hear it, see it and respond to it? Here's how we'd work that out.

Plan the night backward from the ask. Decide how people will give, then set the sound, screens, lighting and timing around that moment.

Start with how people will give

A live auction, a paddle raise and a text-to-give campaign all ask different things of the room. Before you talk about gear, write down which ones you're doing and in what order:

Talk to the auctioneer early

If you've hired an auctioneer or a fundraising emcee, get them on a call with your AV lead well before the event. They've done this a lot, and they'll have opinions you'll want to hear. Ask which kind of mic they like, where they want to stand, whether they walk the room, and what they need to see from the stage.

Whatever they pick, have a spare ready and tested, and ask for one more wireless mic than you think you need. Our wireless microphone guide walks through how to count them. If bid spotters are working the floor, make sure the auctioneer can see them and hear them, too.

Make sure the back tables can hear

A ballroom full of round tables is a hard room for sound. It's quiet at the sound check, and then 300 people, plates and conversations fill it up. People at the back tables are often the first to stop listening, and they can't give to an ask they can't hear.

Have your AV team plan coverage for the whole room with the real table layout, all the way to the back wall. Walk to the farthest table during sound check and listen for yourself.

It also helps to talk to the banquet captain. Ask if clearing can pause during the mission video and the ask, or finish before they start. Stacking plates during the most emotional moment of the night is nobody's fault, but it's easy to avoid with a short conversation and a line in the schedule.

Plan the screens around round tables

At a round table, some guests will have their backs to the stage. One center screen can leave those guests twisting in their chairs all night. Two side screens, or a wide LED wall placed with sightlines in mind, can make it easier for everybody to see without moving.

Think about what's on screen for each part of the night, too. A gala usually needs some version of these:

Every one of those needs an owner and a deadline. Our slides and video handoff guide covers how to get files to your AV team in good shape.

Keep enough light on the guests

A gala room looks beautiful dim, but an auctioneer can't take a bid from a paddle they can't see. Plan a separate lighting look for the giving moment, with enough light on the tables for people to see each other and for the auctioneer to see them.

That's useful beyond the bidding, too. It's easier to raise your hand in a room where people can see you. Then you can drop back to the warmer room look for the rest of the night. Keep the stage lit for all of it, with good light on the speakers' faces, so nobody at the lectern disappears.

Test giving in the actual room

Ballrooms can be rough on phones, especially once a few hundred guests are in there. If your giving runs on a QR code, a text number or a bidding app, test it from inside the room on more than one carrier. Ask the venue about guest Wi-Fi early, and whether it can handle everybody at the same time.

For a QR code, go to the farthest table and try to scan it off the screen. If you can't, make it bigger, and leave it up longer than feels necessary. Table cards with the same code are a good backup, and they don't depend on anybody's view of the stage.

If you're showing a running total, decide who updates it and how. It can come from your giving platform or from a person with a laptop, but someone has to own it. Work that out before the night, then try it once with fake numbers during rehearsal.

Give the mission video a real moment

A lot of galas have one video that tells the story of the people the organization helps. It's usually the emotional center of the night, so treat it like a show cue. Get the final file early, play it in the room at full volume, and keep a backup copy ready. Check it with the real sound system, because a soft interview that's fine on a laptop can vanish in a full ballroom.

Ask about the music in it, too. Performing a song publicly is one of the rights a copyright owner controls, and under U.S. copyright law "publicly" includes any place where a substantial number of people outside your family and friends are gathered. A charity event isn't automatically in the clear. The law's nonprofit exception is narrow, and it doesn't cover a performance where performers or organizers get paid. Your venue may have a music license that helps, so ask them what it covers. Putting a song inside a video is a separate question, and posting that video online afterward is another. The simple route is music that's licensed for the way you plan to use it. This isn't legal advice, so check with your own counsel if you're not sure.

Write the ask into the run of show

The moment between the video and the ask is where a gala can lose momentum. If the video ends and the room sits in the dark for 20 seconds while someone looks for a mic, the feeling starts to fade. So write that handoff down cue by cue. On paper, it might look like this:

  1. The emcee introduces the video and the room dims.
  2. The mission video plays.
  3. The stage lights come up on the speaker, who's already in position with a live mic.
  4. The speaker makes the ask, and the room lights come up for giving.
  5. The screen changes to the giving code or the first bid level.
  6. Music comes in under the close, and the program moves on to the next item.

Our run of show guide shows how to lay out the whole night. If you're giving out awards in the same program, our awards night guide covers that part.

Rehearse the handoffs

You probably won't get a full rehearsal, and you don't really need one. Get the emcee, the auctioneer, your main speaker and your AV lead together before doors for a quick walk through the handoffs: who's speaking, which mic they're using, where they stand, and what happens on screen when they finish.

Give yourself time for this in the load-in schedule. Galas tend to have a lot going on before doors, with decor, catering and sponsors all in the room, so it's worth holding a real spot for it.

A short FAQ

Can the band's sound system cover the program too?

Sometimes. Ask who'll be mixing the speeches and the videos, and whether the system covers the whole room at speaking level. A setup built around a band may not be the right fit for an auctioneer, so have that conversation early.

Should we show the running total on screen?

It can add a lot of energy when someone's keeping it current and the number is moving. If you can't update it quickly, leave it off or share milestones from the stage instead. A number that sits still on a giant screen doesn't help anybody.

Do we need AV for the silent auction area?

Usually just enough for people to hear the announcements, especially the closing call. Check whether that area has power for checkout tables and a solid internet connection if you're using a bidding app. Our event power guide has the questions to ask.

How early should we bring in the AV team?

As soon as you've got the venue and a rough program. The giving plan changes what you need from the room, so it's easier to plan around it early than to fix it the week of the event.

Let's plan your gala together

SPRK handles audio and video production for Phoenix-area events, along with the lighting and planning around them. Send us your venue and your rough program, and we'll help you work out what the night needs.

Back to the Journal for more practical event planning guides.

Free worksheet: the Show Moment Blueprint

Write down the moments that have to land (the opening, the big reveal, every handoff), then note who is on stage, what cue runs, who owns it and what happens if it doesn’t. Bring it to the planning call and everyone works from the same page.

Get the free worksheet

Free Planning Tool

Plan your event in a few minutes.

Tell our free planner about your room and your headcount, and it builds the stage for you: the screen size and who can read it, the sound, the lighting looks, the crew, a run of show and a checklist. Save it as a PDF, or send it to us when you’re ready.

Plan Your Event

Keep planning

A few more guides we put together for Phoenix event planners: